Agi-security SYS-HC0451 Standalone DVR Quick Start Guide User Manual download pdf (Page 27)

Figure 2-16

2.6.2 Redundancy

Redundancy function allows you to memorize record file in several disks. When there is file

damage occurred in one disk, there is a spare one in the other disk. You can use this

function to maintain data reliability and safety.

z In the main menu, from Setting->Storage-> Schedule, you can highlight redundancy

button to enable this function.

z In the main menu, from Main menu->Setting->Storage->HDD Manager, you can set one or

more disk(s) as redundant. You can select from the dropdown list. System auto

overwrites old files once hard disk is full.

Please note only read/write disk or read-only disk can backup file and support file search

function, so you need to set at least one read-write disk otherwise you can not record video.

Note

About redundancy setup:

z If current channel is not recording, current setup gets activated when the channel begin

recording the next time.

z If current channel is recording now, current setup will get activated right away, the current file

will be packet and form a file, then system begins recording as you have just set.

After all the setups please click save button, system goes back to the previous menu.

Playback or search in the redundant disk.

There are two ways for you to playback or search in the redundant disk.

z Set redundant disk(s) as read-only disk or read-write disk (Main menu->Setting->Storage-

>HDD Manager). System needs to reboot to get setup activated. Now you can search or

playback file in redundant disk.

z Dismantle the disk and play it in another PC.

2.7 Snapshot

2.7.1 Schedule Snapshot

z On the preview interface, right click mouse and then select Manual->Record, or in the main

menu, from Setting->Storage->Record, check the box to enable snapshot function of

corresponding channels. See Figure 2-17.

z In main menu, from Setting->Camera->Encode->Snapshot interface, here you can input

snapshot mode as regular, size, quality and frequency. See Figure 2-18.

z In main menu, from Setting->Camera->Encode->Schedule interface, please enable snapshot

function. See Figure 2-19.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 38 39

No comments

Agi-security SYS-HC0451 Standalone DVR Quick Start Guide User Manual Page 27