Agi-security SYS-HC0451 Standalone DVR Quick Start Guide User Manual download pdf (Page 15)

2.4 Manual Record

Note:

You need to have proper rights to implement the following operations. Please make sure the

HDD has been properly installed.

There are three ways for you to go to manual record menu.

z Right click mouse and then select Manual->Record.

z In the main menu, from Storage->Record.

z In live viewing mode, click record button in the front panel or record button in the remote

control.

Manual record menu is shown as in Figure 2-4.

2.4.1 Record Operation

System supports main stream and sub stream. There are three statuses:

schedule/manual/stop. Please highlight icon“○” to select corresponding channel.

z Manual: The highest priority. After manual setup, all selected channels will begin ordinary

recording.

z Schedule: Channel records as you have set in recording setup (Main Menu->Setting-

>System->>Schedule)

z Stop: Current channel stops recording.

z All: Check All button after the corresponding status to enable/disable all-channel

schedule/manual record or enable/disable all channels to stop record.

Figure 2-4

2.4.2 Snapshot Operation

Check the corresponding box to enable/disable schedule snapshot function. See Figure 2-5.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 38 39

No comments

Agi-security SYS-HC0451 Standalone DVR Quick Start Guide User Manual Page 15