Agi-security SYS-HC0451 Standalone DVR Quick Start Guide User Manual download pdf (Page 24)

z Channel: Please select the channel number first. You can select “all” if you want to set for

the whole channels.



: Sync connection icon. Select icon of several dates, all checked items can be

edited together. Now the icon is shown as



: Click it to delete a record type from one period.

z Record Type: Please check the box to select corresponding record type. There are four

types: Regular/MD (motion detect)/Alarm/MD&Alarm.

z Week day: There are eight options: ranges from Saturday to Sunday and all.

z Holiday: It is to set holiday setup. Please note you need to go to the General interface (Main

Menu->System->General) to add holiday first. Otherwise you can not see this item.

z Pre-record: System can pre-record the video before the event occurs into the file. The value

ranges from 1 to 30 seconds depending on the bit stream.

z Redundancy: System supports redundancy backup function. You can highlight Redundancy

button to activate this function. Please note, before enable this function, please set at least

one HDD as redundant. (Main menu->Setting->Storage->HDD Manager). Please note this

function is null if there is only one HDD.

z Period setup: Click button

after one date or a holiday, you can see an interface shown

as in Figure 2-15.There are four record types: regular, motion detection (MD), Alarm, MD &

alarm.

Please following the steps listed below to draw the period manually.

a) Select a channel you want to set. See Figure 2-11.

Figure 2-11

b) Set record type. See Figure 2-12.

Figure 2-12

c) Please draw manually to set record period. There are six periods in one day. See Figure

2-13.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 38 39

No comments

Agi-security SYS-HC0451 Standalone DVR Quick Start Guide User Manual Page 24